Syntech HAG Flex
Single-component polyurethane resin (which can be mixed with an expansion accelerator – component B), permanently flexible, hydroswelling (increases its initial volume approximately tenfold), solvent-free, ideal for sealing small and large water infiltrations in concrete or solid masonry in general by injection (check beforehand that the masonry has sufficient strength to withstand the pumping pressure and the hydroswelling pressure exerted by the resins). Ideal for filling and sealing small cavities, joints and discontinuities subject to movement.
Syntech HAG Flex
Single-component polyurethane resin (which can be mixed with an expansion accelerator – component B), permanently flexible, hydroswelling (increases its initial volume approximately tenfold), solvent-free, ideal for sealing small and large water infiltrations in concrete or solid masonry in general by injection (check beforehand that the masonry has sufficient strength to withstand the pumping pressure and the hydroswelling pressure exerted by the resins). Ideal for filling and sealing small cavities, joints and discontinuities subject to movement.
Syntech HAG Eco
Single-component polyurethane resin (which can be supplemented with an expansion accelerator – component B), suitable for contact with drinking water, semi-flexible, hydroswelling (increases its initial volume approximately 20-fold), solvent-free, ideal for sealing, by injection, small and large water infiltrations in concrete or solid masonry in general. Ideal for filling large voids and cavities within masonry (check beforehand that the masonry has sufficient strength to withstand the pumping pressure and hydroswelling pressure exerted by the resins).
Syntech HAG Eco
Single-component polyurethane resin (which can be supplemented with an expansion accelerator – component B), suitable for contact with drinking water, semi-flexible, hydroswelling (increases its initial volume approximately 20-fold), solvent-free, ideal for sealing, by injection, small and large water infiltrations in concrete or solid masonry in general. Ideal for filling large voids and cavities within masonry (check beforehand that the masonry has sufficient strength to withstand the pumping pressure and hydroswelling pressure exerted by the resins).
Syntech HAG Cleaner
Specific cleaning agent for the equipment required during injection operations with water-reactive resins used to stop water infiltration in buildings. Low-toxicity oily rinsing detergent with high solvent capacity for uncured polyurethanes, designed to clean and lubricate the internal hydraulic pumping circuits of both manual and electric pumps. Replaces acetone, methylene chloride and other commonly used detergents.
Syntech HAG Cleaner
Specific cleaning agent for the equipment required during injection operations with water-reactive resins used to stop water infiltration in buildings. Low-toxicity oily rinsing detergent with high solvent capacity for uncured polyurethanes, designed to clean and lubricate the internal hydraulic pumping circuits of both manual and electric pumps. Replaces acetone, methylene chloride and other commonly used detergents.
Syntech HAG Iniettore
Rubber and steel injection packers to be inserted at cracks, fissures, voids, joints, cavities, etc. to be waterproofed using the water-expanding polyurethane resins Syntech HAG Eco and Syntech HAG Flex, specifically designed for the immediate arrest of water infiltration. Fitted with a “flat head” and non-return valve, they must be used in conjunction with Syntech HAG Connettore. Available in two different sizes: Syntech HAG Iniettore 120 = 120x13 mm; Syntech HAG Iniettore 170 = 170x16 mm.
Syntech HAG Iniettore
Rubber and steel injection packers to be inserted at cracks, fissures, voids, joints, cavities, etc. to be waterproofed using the water-expanding polyurethane resins Syntech HAG Eco and Syntech HAG Flex, specifically designed for the immediate arrest of water infiltration. Fitted with a “flat head” and non-return valve, they must be used in conjunction with Syntech HAG Connettore. Available in two different sizes: Syntech HAG Iniettore 120 = 120x13 mm; Syntech HAG Iniettore 170 = 170x16 mm.
Syntech HAG Iniettore 170
17 cm in length and 16 mm in diameter, this rubber and steel injector is to be inserted in line with the damage, cracks, loose foundations, joints, cavities and so on, then waterproofed through the use of Syntech HAG Eco and Syntech HAG Flex hydro-expansive polyurethane resins, specifically for immediately stopping water infiltration. Equipped with a "flat head" with non-return valve, it is used in conjunction with the Syntech HAG Connettore.
Syntech HAG Iniettore 170
17 cm in length and 16 mm in diameter, this rubber and steel injector is to be inserted in line with the damage, cracks, loose foundations, joints, cavities and so on, then waterproofed through the use of Syntech HAG Eco and Syntech HAG Flex hydro-expansive polyurethane resins, specifically for immediately stopping water infiltration. Equipped with a "flat head" with non-return valve, it is used in conjunction with the Syntech HAG Connettore.
Syntech HAG Connettore
Connection element between flat-head injection ports and the injection hose of manual or electric pumps used to stop water infiltration by injecting water-reactive polyurethane resins.
Syntech HAG Connettore
Connection element between flat-head injection ports and the injection hose of manual or electric pumps used to stop water infiltration by injecting water-reactive polyurethane resins.
Syntech HAG Pompa AZ-PT/B
Single-piston, self-priming, single-acting manual pump for injecting fluid polyurethane and epoxy resins. The pump delivers a maximum pressure of 100 bar. The flow rate is 1 litre in 55 cycles.
Syntech HAG Pompa AZ-PT/B
Single-piston, self-priming, single-acting manual pump for injecting fluid polyurethane and epoxy resins. The pump delivers a maximum pressure of 100 bar. The flow rate is 1 litre in 55 cycles.
Syntech HAG Mono
Single-component hydroswellable polyurethane resin (does not require a catalyst and increases its initial volume approximately threefold), solvent-free, ideal for sealing, by injection, small and large water infiltrations in concrete or solid masonry in general. Ideal for filling large voids and internal cavities in masonry. It reacts with water and forms a flexible closed-cell foam. Developed for application in wet and dry structures.
Syntech HAG Mono
Single-component hydroswellable polyurethane resin (does not require a catalyst and increases its initial volume approximately threefold), solvent-free, ideal for sealing, by injection, small and large water infiltrations in concrete or solid masonry in general. Ideal for filling large voids and internal cavities in masonry. It reacts with water and forms a flexible closed-cell foam. Developed for application in wet and dry structures.
Syntech HAG Acryl
Syntech HAG Acryl is an injection system designed for sealing cracks and joints in concrete. Thanks to its extremely low viscosity (equivalent to that of water), it can also be used to seal the finest cracks. The setting time can be adjusted accordingly, ensuring sealing across a wide range of applications:
Syntech HAG Acryl
Syntech HAG Acryl is an injection system designed for sealing cracks and joints in concrete. Thanks to its extremely low viscosity (equivalent to that of water), it can also be used to seal the finest cracks. The setting time can be adjusted accordingly, ensuring sealing across a wide range of applications:
Syntech HAG Stabiland
Syntech HAG Stabiland is a two-component polyurethane resin for low-viscosity, fast-reacting injections, developed for waterproofing and consolidating soil, mining excavations and tunnels subject to high water flow rates or pressures. Due to its extremely low viscosity, it can seal hairline cracks. In dry substrates, once mixed and cured, Syntech HAG Stabiland develops a highly resistant polyurethane foam with mechanical strengths exceeding 70 MPa after one day.
Syntech HAG Stabiland
Syntech HAG Stabiland is a two-component polyurethane resin for low-viscosity, fast-reacting injections, developed for waterproofing and consolidating soil, mining excavations and tunnels subject to high water flow rates or pressures. Due to its extremely low viscosity, it can seal hairline cracks. In dry substrates, once mixed and cured, Syntech HAG Stabiland develops a highly resistant polyurethane foam with mechanical strengths exceeding 70 MPa after one day.